all4-PCB

all4-PCB is a proud representative of Pola e Massa in North America. The company designs and manufactures machines for PCBs, metal surface treatments and automation. They have been active in the field of the Printed Circuit Boards since 1978; the experience acquired during the years has allowed Pola e Massa to become one of the leading brands globally. Their factory (area 6000 sqm) is located in Ovada (AL) – in the heart of one of the most advanced industrial areas of Italy. All the activities of design, final assembling and testing are directly performed by Pola e Massa. The stocked spare parts inventory ensures a fast supply to all the end-users of Pola e Massa’s equipment.

PeM Planarizer

PM650 Planarizer Video

Features:

  • Original orbital 10 brush post via fill planarizer with original Pola & Massa orbital brush technology
  • Upgraded design based on more than 100 units sold since 2004
  • High sanding power with 10 brushes translates into productivity
  • Quick release brushes
  • Panel edges can be selectively sanded “picture frame mode”
  • Thin material guide system
  • User friendly gravity filter system
  • Optional anti-warp system for thin material

Planarizer Evolution 3000

Evolution 3000 video

Features:

  • Single brush automatic conveyorized sander
  • Programmed recipes can be set up for different sanding requirements
  • Regional sanding, such as only panel perimeter or center or distinct areas
  • Various sanding media diameters are available

    xxxx

Washer 650

Features:

  • Designed for cleaning PCBs after routing, prior to packaging, post final finish
  • Equipment is provided optionally with top and bottom Nylon brushes
  • Heating of 1st rinse sump and surfactant addition is possible
  • Multiple rinse zones with high pressure pump options
  • Fluid head drying; 2 pairs of heads being standard
  • Full stainless steel machine with painted steel covers

Pumice Scrubbing Equipment

Features:

  • Stainless steel made, the machines are suitable for copper surface preparation before dry-film application or other printing processes;
  • Metal surface, also thanks to the support of dedicated brushes, is perfectly cleaned getting a proper roughness to facilitate a better dry-film adherence;
  • Machines can alternatively use pumice or aluminum oxide;

    xxx

Unibloc washer for post HASL process

Features:

  • For cleaning of PCBs after HASL or IR Reflow
  • Cleaning after any processes that contaminate the PCB
  • Warm water brushing and high pressure rinsing
  • Nylon brushes assist the cleaning process
  • Fluid head drying; 2 pairs of heads being standard
  • Full stainless steel machine with painted steel covers

Brushing machines Unibloc

Features:

  • Used for deburring after drilling or pressplate cleaning
  • Also used for pretreatment process solutions
  • Single frame machine with full stainless steel body with painted steel covers
  • Thin board capability to 4 mil cores
  • Automatic thickness adjustment for consistent footprint
  • Recipe set-up for different panel designs
  • 2 or 4 brush version available
  • With optional Copper particle filter
  • Optional pre-scrub blow-off module

Modular

Brush removal video
Brush installation video

Features:

  • Used for deburring after drilling or pressplate cleaning
  •  Also used for pretreatment process solutions
  • Modular machine with full stainless steel body with painted steel covers
  • Machine design allows inclusion of ultrasonic, super high pressure or super high flow rinse modules
  • Thin board capability to 4 mil cores
  • Automatic thickness adjustment for consistent footprint
  • Recipe set-up for different panel designs
  • 2 or 4 brush version available
  • With optional Copper particle filter
  • Optional pre-scrub blow-off module

Economic automation equipment VSC Rack Loader/Unloader

Features:

  • For loading and unloading rigid and semi rigid boards where the boards must not touch each other
  • The boards are held in slot-racks in semivertical position separated from each other to prevent scratches and deformation
  •  The rack is conveniently moved to/from its trolley for easy handling in the factory.
  • The unloader unit is fitted with a centering de

VHC Panel Stack Loader/Unloader

Features:

  • For loading and unloading rigid and semi rigid boards where the boards must not touch each other
  • The boards are held in slot-racks in a semi-vertical position separated from each other to prevent scratches and deformation
  • The rack is conveniently moved to/from its trolley for easy handling in the factory.
  • The unloader unit is fitted with a centering device
Menu